How to Clean Samsung Washer Filter

To clean the Samsung washer filter, follow these steps. First, locate the filter at the bottom front of the machine.

Then, twist and remove the cover, and take out the filter by pulling it out.

How To Clean Samsung Washer Filter


Understanding The Importance Of Regular Washer Filter Cleaning

Regular maintenance of your Samsung washer filter is essential for the proper functioning and longevity of your machine. Over time, dirt, debris, lint, and other particles can accumulate in the filter, causing it to become clogged. A clogged filter can hinder the performance of your washer and lead to various issues such as reduced water flow, slow drainage, and even foul odor. To avoid these problems and ensure that your Samsung washer operates at its best, it is crucial to understand the importance of regular washer filter cleaning.

Why Clean Your Samsung Washer Filter Regularly

Regularly cleaning your Samsung washer filter offers several significant benefits:

  1. Efficient Performance: By cleaning the filter regularly, you can ensure that your machine operates at its optimal performance level. A clean filter allows for proper water flow, preventing any blockages that could affect the effectiveness of the washing cycle.
  2. Prolonged Lifespan: The accumulation of debris in the filter can put additional strain on your washer’s components, potentially leading to premature wear and tear. By cleaning the filter regularly, you can prevent unnecessary damage and extend the lifespan of your Samsung washer.
  3. Prevention of Odor: A clogged filter can trap dirt, detergent residue, and other particles, creating a breeding ground for bacteria. This can result in unpleasant odors emanating from your washer. Regular cleaning of the filter ensures that these odor-causing particles are removed, keeping your machine fresh and clean-smelling.

Benefits Of Maintaining A Clean Washer Filter, Ensuring

Maintaining a clean washer filter not only helps in the overall efficiency of your Samsung washer but also provides additional advantages:

  • Optimized Cleaning: A clean filter allows for proper water flow, ensuring that your clothes are thoroughly cleaned with each cycle. This removes the risk of detergent residue remaining on your garments, resulting in cleaner and fresher laundry.
  • Improved Energy Efficiency: When the filter is clean, water can flow freely, reducing the need for your washer to work harder to compensate for any blockages. This improved water flow enhances the energy efficiency of your Samsung washer, helping you save on utility bills.
  • Reduced Maintenance Costs: Regularly cleaning the filter can help prevent potential issues that may require costly repairs. By maintaining a clean filter, you can avoid more significant problems down the line, ultimately saving you money on future repairs.

Now that you understand the importance of regular washer filter cleaning and the benefits it offers, it’s time to learn how to clean your Samsung washer filter effectively. Follow the steps provided in our next blog post to ensure a hassle-free cleaning process that keeps your washer in top-notch condition.

Locating And Accessing The Washer Filter

Regular maintenance is essential to ensure the longevity and optimal performance of your Samsung washer. One crucial aspect of this maintenance is cleaning the washer filter. Over time, debris, lint, and other foreign objects can accumulate in the filter, potentially causing clogs and affecting your machine’s efficiency. In order to clean the filter, you must first locate and access it. In this guide, we will walk you through the process of finding the location of the washer filter in your Samsung machine and the tools you’ll need to access it.

Finding The Location Of The Washer Filter In Your Samsung Machine

Before you begin cleaning the washer filter, it’s important to know where exactly it is located in your Samsung machine. The exact location may vary depending on the model and type of washer you have. Here are a few common methods for finding the location of the washer filter:

  • Refer to the user manual: The easiest way to determine the location of the washer filter is to consult the user manual provided by Samsung. The manual usually contains detailed instructions on maintenance tasks, including the filter’s location.
  • Check the front or top panel: In some Samsung washers, the filter is located behind a front or top panel. Carefully examine the washer to see if there are any panels that can be removed to access the filter. Look for any latches, screws, or clips that may be securing the panel in place.
  • Inspect the back of the machine: In certain models, the washer filter may be located at the back of the machine. In this case, you’ll need to move the washer away from the wall to access the filter. Look for any access panels or removable plates that might be hiding the filter.

Tools Needed For Accessing The Washer Filter

Now that you know where to find the washer filter in your Samsung machine, let’s take a look at the essential tools you’ll need to access it:

Tools Description
Screwdriver A screwdriver will be needed to remove any panels or covers that are securing the filter.
Pliers Pliers come in handy for gripping and removing any screws or clips that may be holding the panel or cover in place.
Cleaning brush A small cleaning brush with stiff bristles will help you remove any debris or dirt that has accumulated in the filter.
Bucket or towel You’ll need a bucket or towel to catch any water that may spill out when you remove the filter.

With these tools readily available, you’ll be well-prepared to access the washer filter in your Samsung machine and clean it thoroughly. Regularly cleaning the filter will help maintain the performance and efficiency of your washer, ensuring that your laundry is always fresh and clean.

Step 1: Preparing The Washing Machine For Filter Cleaning

To ensure the effective cleaning of your Samsung washer filter, it’s important to start by following the proper steps to prepare the washing machine. By taking a few necessary precautions, you can ensure a safe and hassle-free cleaning process. Let’s dive into the first step.

Switching Off The Washer And Unplugging It From The Power Source

The first and foremost step in preparing your Samsung washer for filter cleaning is to switch off the machine and unplug it from the power source. This step is crucial to ensure your safety during the cleaning process and to avoid any electrical hazards.

To switch off your Samsung washer, locate the power button usually located on the control panel or the top of the machine. Press and hold the power button until the washer completely turns off. Once the machine is powered off, it’s time to unplug it from the power source. Reach behind the machine and disconnect the power cord from the electrical outlet.

Taking Necessary Precautions Before Starting The Cleaning Process

Before you begin cleaning the washer filter, it’s essential to take certain precautions to protect both yourself and the machine. These precautions ensure a safe and efficient cleaning process:

  • Wear protective gloves to shield your hands from any sharp edges or debris that may be present when removing the filter.
  • Place a towel or bucket beneath the filter area to catch any water or debris that may spill during the cleaning process.
  • Read the user manual or consult the manufacturer’s instructions specifically for your Samsung washer model to ensure you are following the correct procedure.
  • Keep cleaning materials such as a brush, mild detergent, and a clean cloth nearby to thoroughly clean the filter.

By adhering to these necessary precautions, you can prevent accidents and ensure the proper cleaning of your Samsung washer filter.

Step 2: Removing And Cleaning The Washer Filter

After locating the filter cover in Step 1, the next step in properly maintaining your Samsung washer is to remove and clean the washer filter. This is an important step to ensure that your washing machine continues to operate efficiently and effectively, preventing any potential issues.

Removing The Filter Cover

To begin, follow these simple steps to remove the filter cover:

  1. Make sure your washing machine is turned off and unplugged from the power source. Safety is important.
  2. Locate the filter cover, usually positioned at the bottom right corner of the washer.
  3. Use a coin or a flathead screwdriver to rotate the filter cover counterclockwise. This will help release the cover.
  4. Once the cover is loose, pull it towards you and remove it completely.

Remember, it’s essential to follow these steps carefully to avoid any damage to the filter cover or the washer itself.

Cleaning The Filter Manually Or Using A Brush

Now that you have successfully removed the filter cover, it’s time to clean the washer filter. There are two methods you can choose from: manual cleaning or using a brush. Here’s how:

Manual cleaning

  1. Once the filter is exposed, gently pull it out from its housing. Be cautious as there might be residual water inside.
  2. Run the filter under warm water to remove any visible dirt, lint, or debris. Be thorough and ensure you clean all sides of the filter.
  3. Inspect the filter closely. If you notice any stubborn dirt buildup, use a soft brush or an old toothbrush to scrub it gently.
  4. Once the filter is clean and free from debris, carefully place it back into its housing. Make sure it is securely inserted.

Using a brush

  1. If you prefer a more convenient method, you can use a brush specifically designed for cleaning washer filters.
  2. Start by locating any visible dirt or debris on the filter. Use the brush to gently scrub the filter, removing any buildup.
  3. Continue brushing until the filter is clean and all residue has been removed.
  4. With the filter now refreshed, place it back into its housing, ensuring it is properly inserted.

Remember, regular cleaning of the washer filter is essential for maintaining the efficiency of your Samsung washer. By following these simple steps, you can keep your washing machine running smoothly and avoid any potential issues in the future.

Step 3: Cleaning The Drain Pump And Drain Hose

To clean the drain pump and drain hose of your Samsung washer, follow these steps. Remove any debris or clogs from the pump and hose to ensure optimal washing performance. Keep your washer filter clean for efficient and hassle-free laundry sessions.

The drain pump and drain hose are crucial components of your Samsung washer that need regular cleaning to ensure proper water flow and prevent clogs. In this step, we will guide you through checking for any debris or obstruction in the drain pump and clearing the drain hose.

Checking For Any Debris Or Obstruction In The Drain Pump

The drain pump plays a vital role in removing water from your washer during the drain cycle. Over time, debris such as lint, hair, and small objects can accumulate in the pump, leading to reduced functionality and potential blockages. Follow these steps to check and clean the drain pump:

  1. First, locate the access panel on the front of your Samsung washer. It is usually located at the bottom of the machine.
  2. Use a flathead screwdriver or another suitable tool to remove the screws securing the access panel.
  3. Once the access panel is removed, you will see the drain pump attached to the bottom of the machine.
  4. Carefully inspect the drain pump for any visible debris or obstructions. If you notice any, use a pair of tweezers or needle-nose pliers to remove them. Be gentle to avoid damaging the pump.
  5. After clearing any visible debris, check the impeller located inside the drain pump. Ensure it spins freely without any resistance or obstructions. If it does not, you may need to replace the drain pump.
  6. Once you have inspected and cleaned the drain pump, reattach the access panel using the screws you removed earlier.

Clearing The Drain Hose To Ensure Proper Water Flow

The drain hose is responsible for carrying the water from the washer to the household drain. Over time, the drain hose can get clogged with lint, dirt, and other debris. Follow these steps to clear the drain hose:

  1. Start by disconnecting the drain hose from the back of the washer. This can usually be done by loosening the clamp or twisting the hose counterclockwise.
  2. Once the hose is disconnected, hold it over a bucket or sink and check for any clogs or blockages. If you notice any debris, use a plumber’s snake or a long, flexible brush to gently dislodge and remove it.
  3. After removing the debris, rinse the drain hose with warm water to ensure it is completely clear.
  4. Make sure to also check the household drain where the hose connects. If there are any debris or obstructions, clean them out.
  5. Once the drain hose and household drain are clear, reattach the hose securely to the back of the washer. Ensure it is tightened properly to prevent any leaks.

Step 4: Reassembling The Washer Filter And Testing

In Step 4 of the Samsung Washer Filter cleaning process, you will learn how to reassemble the filter and test its functionality. This important step ensures that your washer functions properly after maintenance.

Now that you have successfully cleaned the Samsung washer filter, it’s time to reassemble it and test the washer to ensure it is functioning properly. Follow the steps below to complete this process.

Placing The Filter Back Into Its Original Position

  1. Take the clean filter and align it with the opening from where you removed it earlier.
  2. Carefully insert the filter back into its original position, making sure it fits securely.
  3. Push the filter in until it is fully inserted and sits snugly in place.
  4. If there are any locking mechanisms or tabs, ensure they are engaged.

Testing The Washer To Ensure Proper Functioning

  1. Close the washer door securely.
  2. Plug the power cord back into the outlet.
  3. Turn on the washer by pressing the power button.
  4. Select a short cycle or a test cycle to run.
  5. Start the cycle and observe the washer’s performance.
  6. Listen for any unusual noises, such as grinding or scraping sounds.
  7. Check for leaks or water overflow.
  8. Monitor the washer throughout the cycle to ensure it completes without any issues.

Congratulations! You have successfully cleaned the Samsung washer filter and reassembled it. By testing the washer after the cleaning process, you can ensure that it is functioning properly and that the filter has been fully restored to its original position. Regular maintenance of the washer filter will help improve the efficiency and longevity of your Samsung washer.

Frequently Asked Questions On How To Clean Samsung Washer Filter

How Do I Clean The Filter On My Samsung Washing Machine?

To clean the filter on your Samsung washing machine, follow these steps: 1. Locate the filter at the bottom of the machine. 2. Open the cover and remove the filter. 3. Rinse it under running water to remove any dirt or debris.

4. Reinsert the filter and close the cover. 5. Make sure to clean the filter regularly for optimum performance.

Do Samsung Washers Have A Filter To Clean?

Yes, Samsung washers do have a filter that needs to be cleaned.

Where Is The Filter On A Top Load Washer?

The filter on a top load washer is typically located at the bottom of the unit, behind a small removable panel.

How Do I Clean My Top Loader Samsung Washing Machine?

To clean your top loader Samsung washing machine, follow these steps: 1. Mix equal parts of white vinegar and water. 2. Pour the solution into the detergent dispenser. 3. Run a hot water wash cycle without any clothes. 4. Wipe the inside of the machine with a clean cloth.

5. Remove and clean the detergent dispenser and filter.


To ensure the optimal performance of your Samsung washer, regular cleaning of the washer filter is essential. Follow the simple steps outlined in this blog post to keep your washer filter free of debris and clogs. By incorporating this maintenance routine into your household chores, you can prolong the lifespan of your Samsung washer and continue enjoying efficient laundry cycles.

Happy cleaning!

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top