How to Clean Intex Pool for Storage

To clean an Intex pool for storage, drain the water completely and remove any debris from the pool. Then, clean the pool using a mild detergent and a soft brush or cloth.

Text Example

Must-Have Cleaning Essentials For Every Home (Recommended):

Vinegar
Calyptus 45% Pure Super Concentrated Vinegar | Dilutes to 18 Gallons | 9x Power Concentrate Vinegar | 2 Gallons
9.8
  • Consistently delivers the same smell, color, and results - every time. For superior and safer cleaning performance, in and around your home.
Baking Soda
Milliard 5lbs Baking Soda / Sodium Bicarbonate USP - 5 Pound Bulk Resealable Bag
9.9
  • Great household product for anything that needs a bright new look! Use it as a cleansing booster with your laundry or dish detergent, as a pH buffer in swimming pools, or for cleaning kitchen surfaces.
Microfiber Cleaning Cloth
MR.SIGA Microfiber Cleaning Cloth, Pack of 12, Size:12.6
9.7
  • Ultra-soft, highly absorbent, durable, lightweight, non-abrasive microfiber cleaning cloths. Great for cleaning windows, kitchenware, cars, bathrooms, mirrors, or other delicate surfaces. Perfect dish rags that don't smell.
This post may have affiliate links and as an Amazon Associate we earn from qualifying purchases.

Steps To Prepare Your Intex Pool For Storage

Properly preparing your Intex pool for storage is essential to ensure its longevity and keep it in good condition for the next swimming season. By following these simple steps, you can remove debris, clean the walls and floor, drain the water, and store the accessories. Continue reading to learn more about each step.

To start the process, you will need to clear the pool water. Begin by turning off the pump and filter system. Next, use a pool skimmer or net to remove any leaves, insects, or debris floating on the water’s surface. Check for and remove any large objects that may have sunk to the bottom of the pool as well.

After clearing the surface, focus on removing any remaining debris from the pool. This can be achieved by using a pool vacuum or a handheld brush with a telescopic pole. Scrub the walls, steps, and corners of the pool to dislodge any dirt or algae buildup. Work methodically, starting from one end and progressing towards the other end. Once you have thoroughly cleaned the pool, use the net or skimmer to remove any loosened debris from the water.

Now that the debris is cleared, it’s time to give the pool walls and floor a proper cleaning. Fill a bucket or large container with warm water and a mild detergent specifically designed for pool cleaning. Dip a soft brush or sponge into the soapy water and scrub the walls and floor in circular motions, focusing on any visible stains or discoloration. Rinse the walls and floor thoroughly with clean water to remove any soap residue.

Before storing your Intex pool, it is important to completely drain the water. Attach a garden hose to the pool’s drain valve and direct the other end to a suitable drainage area. Open the valve and allow all the water to drain out. Once the pool is empty, remove the hose and ensure the drain valve is securely closed.

Lastly, you need to dry and store the pool accessories. This includes items such as pool ladder, filter cartridge, and other detachable parts. Wipe these accessories clean and then let them air dry completely to prevent moisture buildup. Once dry, pack them away in a clean and dry storage container or bag. Store the container in a cool and dry place, away from direct sunlight, to avoid any damage.

Clearing The Pool Water

Clearing the pool water is crucial before storing your Intex pool to ensure that it remains clean and well-maintained. Neglecting this step can lead to water contamination and damage to the pool materials. In this section, we will guide you through the process of clearing the pool water properly for storage. Follow these steps to make sure your pool is ready for storage.

Testing The Water’s Chemical Balance

Before draining your Intex pool, it is essential to test the water’s chemical balance to determine what adjustments need to be made. Testing the water will help you assess the pH levels and overall quality.

Testing Parameters Ideal Range
pH Level 7.2 – 7.6
Chlorine Level 1 – 3 ppm
Total Alkalinity 80 – 120 ppm

Using a reliable pool water testing kit, measure the pH level, chlorine level, and total alkalinity. Once you have the test results, you can proceed to adjust the water accordingly.

Adjusting The Water’s Ph Levels

The pH level of your pool water plays a vital role in preventing bacterial growth and maintaining water clarity. If the pH is not within the recommended range, you need to adjust it. Here’s how:

  1. Determine if the pH is too high or too low based on your test results.
  2. If the pH is too high (above 7.6), you’ll need to add pH decreaser (sodium bisulfate). Follow the manufacturer’s instructions for the correct dosage based on the size of your pool.
  3. If the pH is too low (below 7.2), you’ll need to add pH increaser (soda ash or sodium carbonate). Again, refer to the manufacturer’s instructions for the correct dosage.
  4. After applying the required chemicals, give the water a few hours to circulate and retest the pH level. Continue adjusting as needed until the pH falls within the recommended range.

Adding Pool Shock Treatment

Pool shock treatment is an important step in clearing the water of any organic contaminants and bacteria. Here’s how you can add pool shock treatment to your Intex pool:

  1. Choose a suitable pool shock treatment product. Make sure to follow the instructions on the packaging for the correct dosage.
  2. Calculate the dosage based on your pool’s water volume.
  3. With the pool’s filtration system running, slowly pour the pool shock treatment into the water.
  4. Allow the pool to circulate for about 24-48 hours before proceeding to the next step.

Running The Pool Filter

Running the pool filter is crucial to ensure that the water remains clean during the storage period. It helps remove any remaining debris, bacteria, or contaminants.

  1. Switch on the pool filter and let it run for at least 8-12 hours each day. The continuous filtration will prevent any buildup and keep the water clear.
  2. Regularly check the filter system, clean or replace the filter cartridges if necessary, and maintain proper water flow.

After completing these steps, your Intex pool water will be clear and ready for storage. Remember to follow these instructions and pay attention to maintaining the proper chemical balance to ensure a clean and well-preserved pool.


Removing Debris From The Pool

Removing Debris from the Pool When it comes to cleaning an Intex pool for storage, the first step is to remove any debris that may have accumulated in the water. This will not only ensure that the pool is clean and ready for storage but also prevent any potential damage or stains that may occur if the debris is left in the pool for an extended period of time. In this section, we will discuss the different methods and techniques you can use to effectively remove debris from your Intex pool.

Skimming The Surface Of The Pool Water

To begin the debris removal process, start by skimming the surface of the pool water. This will help remove any leaves, twigs, or other small debris that may be floating on the surface. Using a pool skimmer net, gently glide it across the surface of the water, collecting the debris as you go. Be sure to empty the net regularly to ensure optimal cleaning efficiency. Skimming the surface of the pool water is a quick and easy way to remove visible debris and keep your pool looking clean and inviting.

Using A Pool Net To Remove Larger Debris

In addition to skimming the surface, it’s important to use a pool net to remove any larger debris that may have made its way into the water. This can include larger leaves, branches, or other objects that are too big to be effectively removed by skimming. With a pool net in hand, carefully move it through the water, targeting areas where you spot larger debris. Gently scoop up the debris, ensuring that you do not damage the pool liner or any filtration systems. By using a pool net, you can effectively remove larger debris and maintain a clean pool environment.

Brushing The Pool Walls And Floor

Once you have removed the visible debris from the surface and using a pool net, it’s time to give attention to the pool walls and floor. Brushing the pool walls and floor will help remove any algae, dirt, or other contaminants that may have accumulated during use. Using a pool brush, start at one end of the pool and work your way around, applying gentle pressure to scrub away any debris or residues. It’s recommended to brush the walls and floor at least once a week to maintain good pool hygiene. Be sure to pay extra attention to corners and hard-to-reach areas to ensure a thorough clean.

Vacuuming The Pool Bottom

Finally, to ensure a comprehensive cleaning, it’s important to vacuum the pool bottom. This will help remove any sediment, sand, or smaller debris that may have settled on the floor of the pool. Attach the pool vacuum to the filtration system and carefully move it across the pool bottom, covering all areas. The vacuum will automatically collect the debris as you move, ensuring that your pool bottom is free from any contaminants. Vacuuming the pool bottom is an essential step for a complete cleaning process. In summary, removing debris from an Intex pool is crucial before storing it. By skimming the surface of the water, using a pool net to remove larger debris, brushing the pool walls and floor, and vacuuming the pool bottom, you can ensure that your pool is thoroughly cleaned and ready for storage.

Cleaning The Pool Walls And Floor

Using A Pool Brush And Pool Cleaning Solution

When it comes to cleaning the walls and floor of your Intex pool for storage, using a pool brush and pool cleaning solution is crucial. These tools will help remove dirt, grime, and any other accumulation that may have built up during the swimming season. Make sure to follow these steps to effectively clean your pool walls and floor. 1. Begin by assembling your pool brush and pool cleaning solution. Choose a brush with sturdy bristles that can effectively scrub away tough stains. The cleaning solution should be suitable for your pool’s surface and safe to use around water. 2. Start by brushing the pool walls in a circular motion, working from the top down. Pay extra attention to areas near the waterline where dirt and algae tend to accumulate. 3. Continue brushing the pool floor, making sure to cover every inch. If there are any stubborn stains or algae growth, apply the pool cleaning solution directly to the affected area. Allow it to sit for a few minutes before scrubbing it away. 4. While brushing, ensure that you exert enough pressure to remove any debris or buildup, but not so much that you damage the pool’s surface. Take breaks as needed to prevent fatigue. 5. Repeat the brushing process until the walls and floor of your Intex pool are spotless and free from any dirt or stains. This may require multiple passes or focusing on specific areas that require extra attention.

Scrubbing Away Algae And Stains

Algae and stains can be stubborn and unsightly, but with the right approach, you can effectively remove them from your Intex pool walls and floor. Follow these steps to tackle algae and stains head-on: 1. Identify any areas with visible algae or stains on the pool walls and floor. These areas may appear discolored, slippery, or have a slimy texture. 2. Apply an algae remover or stain remover specifically designed for pool use. These products are typically available in liquid or granular form. 3. Follow the manufacturer’s instructions for the product, including the recommended amount to use and the necessary contact time. Some products may require you to scrub the affected area with a brush, while others may work more effectively with extended exposure. 4. Allow the algae or stain remover to work its magic before scrubbing the area. This will help loosen and break down the algae or stain, making it easier to remove. 5. Using your pool brush, scrub the affected areas vigorously. Be sure to focus on any remaining algae or stains until they are completely eliminated. 6. Rinse the walls and floor thoroughly after scrubbing to remove any leftover residue from the algae or stain remover.

Paying Attention To The Waterline

The waterline of your Intex pool often accumulates dirt, oils, and other debris that can be challenging to remove. Paying attention to the waterline during the cleaning process is essential for maintaining a spotless pool. Consider the following tips: 1. Use a specifically formulated pool cleaner for removing waterline buildup. These cleaners are designed to cut through oils, grease, and other residues that accumulate at the waterline. 2. Apply the cleaner directly to a sponge or brush, and then scrub the waterline in a back-and-forth motion. Be thorough, ensuring you remove all dirt and debris. 3. Take care not to let the cleaner sit on the pool’s surface for an extended period, as this could potentially damage the pool’s liner. Follow the manufacturer’s instructions for the recommended contact time. 4. Rinse the waterline area thoroughly using clean water. This will remove any remaining cleaner residue and leave the pool looking fresh and sparkly.

Rinsing The Walls And Floor

Once you’ve completed the cleaning process, it’s important to rinse the walls and floor of your Intex pool thoroughly. This step will remove any remaining cleaning solution or debris, leaving your pool ready for storage. Follow these simple tips: 1. Using a garden hose, wet the walls and floor of the pool. Ensure that you cover every surface, including hard-to-reach areas. 2. Start at the top and work your way down, systematically rinsing all surfaces. Pay extra attention to the corners and crevices where dirt can accumulate. 3. Continue rinsing until the water runs clear and all cleaning solution and debris are removed. 4. Take a moment to inspect the walls and floor for any missed spots or remaining dirt. If necessary, repeat the rinsing process in those areas until everything is thoroughly clean. 5. Allow the walls and floor to air dry completely before storing your Intex pool. This will help prevent any moisture-related issues during storage. Cleaning the walls and floor of your Intex pool is a vital step to ensure its longevity and keep it in top condition for future use. By following these techniques, you can achieve a clean and well-maintained pool that will be ready to dive into when the next swimming season arrives.

Draining The Pool Water

Cleaning and properly storing your Intex pool is essential to prolong its lifespan and ensure a smooth setup when the next swimming season rolls around. One crucial step in this process is draining the pool water. By following the correct steps, you can empty your pool efficiently and prepare it for storage. In this article, we will guide you through the process of draining your Intex pool, from attaching a garden hose to monitoring the drain process and ensuring the pool is fully drained.

Attaching A Garden Hose To The Pool Drain Outlet

To begin draining your Intex pool, you’ll need to attach a garden hose to the pool drain outlet. This outlet allows water to flow out of the pool and into a suitable drainage area. Here’s how you can do it: 1. Locate the pool drain outlet. It is usually located towards the bottom of the pool, near the side wall. 2. Take your garden hose and attach it firmly to the pool drain outlet. Ensure that the connection is secure to prevent any leaks. You might need to use a hose clamp if necessary. 3. Position the other end of the garden hose in the desired drainage area away from the pool. This will allow the water to flow freely without causing any damage or flooding.

Guiding The Water Away From The Pool Area

When draining your Intex pool, it’s important to guide the water away from the pool area to prevent any potential damage. Here’s how you can do it: 1. Ensure that the drainage area you’ve chosen is suitable and can handle the amount of water being drained from the pool. 2. Avoid directing the water towards your house, plants, or any other area that could be negatively affected by excessive water flow. 3. Create a pathway for the water to follow by placing additional hoses or using natural slopes on your property. This will help guide the water away from the pool area and prevent pooling or flooding.

Monitoring The Drain Process

While the pool water is draining, it’s important to keep an eye on the process to ensure everything is going smoothly. Here are some key points to consider: 1. Periodically check the drain area and the flow of water to ensure there are no obstructions or leaks. 2. Monitor the water level in the pool to determine the progress of the draining process. This will give you an idea of how much remaining water there is and how long it might take to fully drain the pool. 3. Adjust the hose and drainage setup if necessary to optimize the draining efficiency. Ensure that the water flow is consistent and uninterrupted.

Ensuring The Pool Is Fully Drained

To properly clean and store your Intex pool, it is crucial that the pool is fully drained. Here are some tips to ensure complete drainage: 1. Wait until the water level is significantly lower and then use a pool brush or squeegee to guide any remaining water towards the drain outlet. 2. Tilt the pool slightly to allow any remaining water to flow towards the drain. This will help remove any excess water that might be trapped in lower areas of the pool. 3. Double-check the pool to ensure there are no pockets or hidden areas where water could be retained. Thoroughly inspect the sides and bottom of the pool for any signs of water accumulation. By following these steps and properly draining your Intex pool, you’ll be well on your way to maintaining a clean and long-lasting pool that will be ready for enjoyment when the next swimming season arrives. Remember to take your time and be thorough in this process to ensure the best results.

Drying And Storing The Pool Accessories

As summer comes to a close, it’s time to clean and store your Intex pool to ensure its longevity. While many pool owners focus on cleaning and drying the pool itself, it’s equally important to pay attention to the pool accessories. Properly drying and storing the pool cover, pool pump and filter, and other accessories will not only keep them in good condition, but also make the setup process easier when you’re ready to use them again.

Drying The Pool Cover

Drying the pool cover is the first step towards storing it properly. First, remove the cover from the pool, making sure to shake off any loose debris. Place the cover on a clean, flat surface, such as a patio or driveway. Use a broom or soft brush to gently sweep away any remaining dirt or leaves. Once the cover is clean, allow it to air dry completely. This will help prevent mold or mildew growth during storage.

Cleaning And Drying The Pool Pump And Filter

Next, it’s time to clean and dry the pool pump and filter. Start by disconnecting the pump from the power source and draining any remaining water. Remove any debris or leaves stuck in the pump or filter elements. Use a hose or bucket of water to rinse off the pump and filter, ensuring all dirt and grime are removed. Once cleaned, let the pump and filter air dry completely before storing them in a dry and secure place.

Storing The Pool Accessories Properly

Proper storage of pool accessories is essential to keep them in good condition. Make sure all accessories are completely dry before storing them. It’s a good idea to organize the accessories in a dedicated storage container or bin to keep them organized and prevent loss or damage. You can also use waterproof bags or covers to protect smaller accessories from dust and water. Store the accessories in a cool, dry place, away from direct sunlight, extreme temperatures, and pests.

Covering The Pool And Securing It For Storage

After drying and storing the pool accessories, it’s time to cover the pool and secure it for storage. Start by removing any remaining water from the pool using a submersible pump or a pool vacuum. Once the pool is dry, carefully fold and store the pool liner according to the manufacturer’s instructions. Cover the pool with a properly fitting pool cover to protect it from leaves, debris, and harsh weather. Finally, secure the pool cover using a cover cable or bungee cords to ensure it stays in place during storage.

How To Clean Intex Pool For Storage

Credit: www.amazon.com

Frequently Asked Questions For How To Clean Intex Pool For Storage

How Often Should I Clean My Intex Pool For Storage?

It is recommended to clean your Intex pool for storage at least once a month to prevent dirt and debris buildup. Regular cleaning will ensure that your pool stays in good condition and is ready for use when you decide to set it up again.

What Supplies Do I Need To Clean My Intex Pool For Storage?

To clean your Intex pool for storage, you will need a pool brush, pool skimmer, pool vacuum, pool shock, and pool cover. These supplies will help you remove dirt, leaves, and algae from the pool, balance the water chemistry, and protect it during storage.

How Do I Remove Stains From My Intex Pool Before Storing It?

To remove stains from your Intex pool before storage, mix equal parts of vinegar and water in a spray bottle and spray it onto the stained areas. Let it sit for a few minutes, then scrub with a pool brush.

Rinse thoroughly with water and repeat if necessary.

Can I Leave Water In My Intex Pool During Storage?

It is not recommended to leave water in your Intex pool during storage. Standing water can cause the pool liner to deteriorate and promote the growth of bacteria and algae. It is best to drain the pool completely and ensure it is dry before storing it.

Conclusion

Taking the time to properly clean your Intex pool before storing it is vital to ensure its longevity. By following the steps outlined in this blog post, you can effectively remove debris, sanitize the water, and protect your pool from damage during storage.

Remember to drain the water, clean the pool thoroughly, and allow it to dry completely. Regular maintenance and proper cleaning techniques will help you enjoy your Intex pool for years to come.

Leave a Comment

Your email address will not be published. Required fields are marked *

RSS
YouTube
YouTube
Pinterest
Pinterest
fb-share-icon
Instagram
Scroll to Top