How to Clean Silk Epil 9?

To clean your Silk-Epil 9 epilator, start by detaching the head. Then, rinse the head under warm water to remove any hair or debris. Next, use a cotton swab dipped in isopropyl alcohol to clean the blades.

Finally, reattach the head and store your epilator in a dry place.

How to Clean Silk Epil 9

  • Start by unplugging the device from the power outlet and removing any attachments
  • Dip a clean, soft cloth into lukewarm water and wring it out well
  • Gently wipe down the entire surface of the epilator, being careful not to get the electrical parts wet
  • Use a cotton swab dipped in rubbing alcohol to clean any areas that are particularly dirty or hard to reach with the cloth
  • Once you’ve finished cleaning, dry off the epilator with a clean towel and plug it back in to charge

Braun Silk Epil 9 Disassembly

If you’re like most people, you probably don’t think much about the inner workings of your Braun Silk Epil 9. But if you ever need to disassemble it for cleaning or repairs, it’s helpful to know how everything fits together. Here’s a detailed guide to disassembling your Braun Silk Epil 9:

1. Remove the battery cover by unscrewing the two screws that hold it in place. 2. Take out the batteries and set them aside. 3. Unscrew the four screws that secure the main body of the epilator to the baseplate.

These are located under the battery cover and around the power switch. 4. Carefully lift off the main body of the epilator, taking note of how it’s attached to the power cord (it simply plugs in). You may also want to take note of which way up the epilator is positioned, as some parts can be installed upside-down.

5. Inside the main body of the epilator, you’ll find two sets of springs: one large set near where the power cord attaches, and a smaller set near one end of each tweezing head assembly (there are three heads in total). Each spring is held in place by a small retaining pin – use a paperclip or similar object to carefully remove these pins and release each spring. Be careful not to lose any parts!

Braun Silk-Épil 9

The Braun Silk-épil 9 is an epilator that can be used in the shower. It has a waterproof casing that allows you to use it in the shower without worrying about damaging the device. The Braun Silk-épil 9 also comes with a storage pouch, which is perfect for taking it with you on vacation or storing it in your bathroom cabinet.

This epilator has two-speed settings, so you can choose the setting that best suits your needs. The first setting is for gentle epilation and the second setting is for more efficient epilation. The Braun Silk-épil 9 also comes with a massager head that helps to relax your skin before and after epilation.

Braun Silk Epil 9 Not Spinning

If you own a Braun Silk Epil 9, you may have noticed that the spinning head isn’t working. This can be a frustrating problem, but luckily there are some things you can do to fix it. First, make sure that the batteries are properly installed and charged.

If they are, then try cleaning the spinning head with a cotton swab dipped in rubbing alcohol. If that doesn’t work, then the problem may be with the motor itself. To fix a faulty motor, first unscrew the cap on the bottom of the device.

Then, remove the two screws that hold the motor in place. Finally, replace the old motor with a new one and screw everything back into place. With these simple steps, you should be able to get your Braun Silk Epil 9 spinning head working again in no time!

How to Use Braun Silk Épil 9 Shaver Head

If you’re looking for a way to get rid of unwanted hair, the Braun Silk Epil 9 shaver head is a great option. Here’s how to use it: 1. Wet your skin and the shaver head with warm water.

This will help the razor glide more smoothly. 2. Hold the shaver head at a 90-degree angle to your skin and move it in short, strokes in the direction of hair growth. 3. Rinse off the shaver head and your skin when you’re finished.

Apply lotion to soothe any irritation.

How to Charge Braun Silk Epil 9

The Braun Silk Epil 9 is a great epilator for those looking for a long-lasting and affordable option. Here are some tips on how to charge it: 1. Make sure the charging cord is plugged into a power outlet.

2. Press and hold the power button for two seconds to turn on the Braun Silk Epil 9. 3. Connect the charging cord to the Braun Silk Epil 9 by aligning the two metal pins on the epilator with the corresponding holes in the middle of the charging dock. There will be an audible click when they are properly connected.

4. The LED light on the charging dock will turn red, indicating that the Braun Silk Epil 9 is charging properly. Once it is fully charged, the light will turn green. It takes about one hour to charge fully from an empty battery.

Braun Epilator

An epilator is a hair removal device that uses rotating discs to pluck hair from the root. Epilators can be used on both wet and dry skin, and are often touted as a more gentle alternative to waxing. Braun is one of the leading manufacturers of epilators, and their devices are known for being both effective and comfortable to use.

The Braun Epilator is designed for use on both the face and body and features two-speed settings for different levels of hair removal. The Braun Epilator also comes with a sensitive area cap, which helps to protect delicate skin from irritation. If you’re looking for an easy way to remove unwanted hair, an epilator like the Braun Epilator could be a great option for you!

Braun Silk Epil 9 Metal Bar

The Braun Silk Epil 9 Metal Bar is a great epilator for those with sensitive skin. It comes with a hypoallergenic metal head that is designed to minimize irritation and redness. The Braun Silk Epil 9 Metal Bar also features two-speed settings, so you can choose the setting that best suits your needs.

It also comes with a massaging roller that helps to reduce pain during epilation.

How to Clean Braun Silk Epil 3

If you’re like most people, you probably don’t think about cleaning your Braun Silk Epil 3 very often. But the truth is, it’s important to clean this device regularly to keep it in good working condition. Here are some tips on how to clean Braun Silk Epil 3:

1. First, make sure that the power is turned off and the cord is unplugged from the device. 2. Next, remove the head of the epilator by pressing down on the release button and pulling it away from the body of the device. 3. Once the head is removed, use a soft cloth or brush to remove any hair or debris that may be caught in between the blades.

Be careful not to damage the blades while cleaning them. 4. To clean the body of the epilator, simply wipe it down with a damp cloth or an alcohol-based cleaner. Avoid getting moisture inside of the device as this can damage it.

How To Clean Silk Epil 9

Credit: sg.braun.com

How Do You Clean an Epil 9?

Assuming you are referring to the Braun Silk-Epil 9 epilator, here are the cleaning instructions from the Braun website: To keep your epilator in optimum condition and ensure maximum hygiene, it is important to clean it regularly. The Silk-épil 9 can be easily cleaned under running water.

1. Detach the head of the epilator. 2. Hold the head under running water and move it around to remove any hair or debris. 3. Shake off any excess water and allow the head to air dry before reattaching it to the body of the epilator.

How Do You Deep Clean an Epilator?

If you’re looking to get rid of all the built-up hair and gunk from your epilator, then you’ll need to give it a good deep clean. Here’s how to do it: 1. Unplug your epilator and remove any attachments.

2. Run the head under warm water, using mild soap if necessary, and brush away any debris with a soft-bristled brush. 3. Dry the head thoroughly with a clean towel. 4. Use a cotton swab or toothpick to clear out any remaining hair or dirt from the small crevices of the epilator head.

5. Reattach any attachments and plug in your epilator to test that it’s working properly before using it again on your skin.

How Long Does the Braun Silk Epil 9 Last?

Assuming you are talking about the Braun Silk Epil 9 epilator, it can last up to 4 weeks on a single charge.

How Do You Clean a Braun Epilator After Use?

It’s important to clean your Braun epilator after each use to prevent the build-up of bacteria and hair. Here’s how: 1. Start by removing the head of the epilator.

Use a brush or cotton swab to remove any hair or debris from the head. 2. Next, disinfect the head by soaking it in rubbing alcohol for at least 60 seconds. 3. Once the head is dry, reattach it to the epilator body.

4. To clean the body of the epilator, simply wipe it down with a wet cloth or paper towel. Be sure to avoid getting any water inside the epilator as this could damage it.

Silk Epil 9 – Clean the epilator head instead of buying a new one

Conclusion

If you’re looking for tips on how to clean your Silk Epil 9, you’ve come to the right place. In this blog post, we’ll give you some easy-to-follow guidelines that will help keep your epilator in top condition. First and foremost, it’s important to make sure that the area where you’ll be using your epilator is clean and free of any debris.

This will help ensure that the device doesn’t get clogged with hair or dirt. Once the area is prepped, start by running warm water over the head of the epilator. This will help loosen any built-up dirt or hair.

Next, use a mild soap or cleanser to gently scrub away any remaining residue. Rinse the head of the epilator thoroughly with warm water and dry it off with a soft cloth before storing it away. Following these simple steps will help keep your Silk Epil 9 in tip-top shape – giving you smooth, hair-free skin for seasons to come!

Leave a Comment

Your email address will not be published. Required fields are marked *

RSS
YouTube
YouTube
Pinterest
Pinterest
fb-share-icon
Instagram
Scroll to Top